Epson VS400 User Manual - Page 28
Connecting to a Composite Video Source, Installing Batteries in the Remote Control, S-Video
View all Epson VS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1. Make sure the projector and your video source are turned off. 2. Connect the S-Video cable to your video source's S-Video output port. 3. Connect the other end to the projector's S-Video port. Parent topic: Connecting to Video Sources Related references Projector Parts - Rear Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1. Make sure the projector and your video source are turned off. 2. Connect the cable with the yellow connector to your video source's yellow video output port. 3. Connect the other end to the projector's Video port. Parent topic: Connecting to Video Sources Related references Projector Parts - Rear Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. 28