Epson VS400 User Manual - Page 99
Power light, Lamp light, Temperature, Status and solution, light, High Altitude Mode
View all Epson VS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Power light Red Red Red Orange Lamp light Off Off Flashing red Flashing orange Temperature light Flashing orange Red Off Off Status and solution Projector is too hot. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Make sure the environmental temperature is not too hot. Projector has overheated and turned off. Leave it turned off to cool down for five minutes. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If overheating continues, replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. Lamp or lamp cover has a problem. • Close the lamp cover securely. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Replace the lamp soon to avoid damage. Do not continue using the projector. 99