Epson WF-8090 Users Guide - Page 196
Running a Product Check, LCD screen message, Condition/solution, Parent topic, Related references
View all Epson WF-8090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
LCD screen message Condition/solution Maintenance rollers on XX are nearing the end of their service life. The maintenance rollers need to be replaced periodically for optimal performance. (Paper may not feed correctly from the paper cassette when the maintenance roller is near the end of its service life.) Maintenance rollers on XX are at the Contact your dealer to replace the maintenance rollers. Reset end of their service life. the maintenance roller counter and select the paper cassette for which you replaced the maintenance rollers. You need to replace the following ink Replace the ink cartridge indicated on the LCD screen. cartridge(s). Memory full Reduce the size of the print job. Invalid IP address and subnet mask. There is a problem with the network connection to your product. Recovery mode An error has occurred during firmware updating. Connect your product using a USB cable and try downloading the Firmware Update from the Epson support site. If you still need help, contact Epson for support. Parent topic: Solving Problems Related references Where to Get Help Related tasks Checking for Software Updates Related topics Replacing Ink Cartridges and Maintenance Boxes Solving Paper Problems Wi-Fi or Wired Networking Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Load plain paper in the product. 3. Press the arrow buttons to select Menu and press the OK button. 196