Epson WorkForce EC-C7000 Users Guide - Page 326
Product Makes Noise, But Nothing Copies, Product Makes Noise When It Sits for a While
![]() |
View all Epson WorkForce EC-C7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
Product Makes Noise, But Nothing Copies If your product makes a noise, but nothing copies, try these solutions: • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • If the nozzle check page does not print, but the product's power is on, make sure your product software is installed correctly. • Make sure your product is level (not tilted). Parent topic: Solving Copying Problems Related concepts Print Head Nozzle Check Print Head Cleaning Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Copies Have Incorrect or Faint Colors If your copies have incorrect, uneven, smeared, or faint colors, try these solutions: • Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if necessary. • Do not press too hard on the original when you copy from the scanner glass. • Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not recommended. Caution: Do not spray glass cleaner directly on the scanner glass. • Clean the ADF. • Wipe any dirt or dust off of your originals. • If the colors are smeared, try lowering the copy density setting on the LCD screen. • Make sure your paper is not curled. • When vertical banding appears or the paper is smeared, clean the paper path. 326
![](/manual_guide/products/epson-workforce-ecc7000-users-guide-e1a2526/326.png)