Epson WorkForce EC-C7000 Users Guide - Page 334
Always Spool RAW Datatype, Plain Paper Density Setting
![]() |
View all Epson WorkForce EC-C7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
• Make sure Quiet Mode is turned off. • Clear space on your hard drive or run a defragmentation utility to free up existing space. • Close any programs you are not using when you print. • If your product is connected to a USB hub, connect it directly to your computer instead. • If printing becomes slower after printing continuously for a long time, the product may have automatically slowed down to protect the print mechanism from overheating or becoming damaged. Let the product rest with the power on for 30 minutes, then try printing again. • If you are printing over a wireless network, factors such as interference, network traffic, or weak signal strength may affect your printing speed. Note for Latin America: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet service provider for instructions. For the fastest printing, select the following settings in your product software: • Make sure the paper type setting matches the type of paper you loaded. • Turn on any high speed settings in your product software. • Select a lower print quality setting. • Make sure the ink drying time has not been increased for double-sided printing. • On the product control panel, make sure Plain Paper Density Setting is set to Standard. • Windows: Click the Maintenance or Utility tab, select Extended Settings or Speed and Progress, and select the following settings: • Always Spool RAW Datatype • Page Rendering Mode • Print as Bitmap • Windows: Select Printing preferences, click the More Options tab, and make sure the Bidirectional printing setting is enabled. • Mac: Select System Preferences, select Printers & Scanners, and select your product. Select Options & Supplies, select Options (or Driver), and enable the Bidirectional printing setting. • Enable the bidirectional setting on the product control panel (Settings > General Settings > Printer Settings > Bidirectional). 334
![](/manual_guide/products/epson-workforce-ecc7000-users-guide-e1a2526/334.png)