Epson WorkForce EC-C7000 Users Guide - Page 330
Paper Jam Problems, Paper Jam Problems in the Rear Cover, Paper Ejection Problems, Settings
![]() |
View all Epson WorkForce EC-C7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 330 highlights
Paper Jam Problems If a paper jam occurs in the product, a message appears on the LCD screen. Follow the on-screen instructions to locate the paper jam and remove the paper. If any torn pieces of paper remain inside the product, select Settings > Maintenance > Remove Paper after clearing the paper jam error. Caution: Never touch the buttons on the control panel while your hand is inside the product. If the product starts operating, it could cause an injury. Be careful not to touch the protruding parts to avoid injury. Remove the jammed paper carefully or you may damage the product. Parent topic: Solving Paper Problems Paper Jam Problems in the Rear Cover If paper has jammed in the rear cover, follow the steps here to clear the jam. 1. Cancel the print job, if necessary. 2. Squeeze the tabs and open the rear cover. 3. Carefully remove any jammed paper from inside the product. 4. Carefully remove any jammed paper from the duplexer. 5. Close the rear cover. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint. • If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select the correct paper type setting when you reprint. Parent topic: Solving Paper Problems Related references Paper Type Settings - Control Panel 330
![](/manual_guide/products/epson-workforce-ecc7000-users-guide-e1a2526/330.png)