Epson WorkForce ES-500W II Users Guide - Page 105
AP mode ES-500W II, slowly ES-500W II
View all Epson WorkForce ES-500W II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Light status Condition/solution The ! error light is flashing slowly A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the light continues to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support. The ! error light is on The scanner cover is open. Make sure the scanner cover is closed and there is no jammed paper inside. The following lights are flashing quickly: • ! error A fatal error has occurred. Try the following: • Check the scanner connection to your computer to make sure it is secure. • ready • Turn the scanner off and then back on again. If the error continues, • AP mode (ES-500W II) the scanner may be malfunctioning. Contact Epson for support. • Wi-Fi (ES-500W II) The ready light is off and The firmware update has failed and the scanner is in recovery mode. the following lights are on: Try updating the firmware again. • ! error • automatic feeding mode • double feed detection skip • slow mode • AP mode (ES-500W II) • Wi-Fi (ES-500W II) The Wi-Fi and ! error An access point settings error (security error) has occurred. Press the lights are flashing slowly (ES- stop button to clear the error, restart the devices you want to connect 500W II) to the network, then reconnect to the network. The Wi-Fi light is flashing slowly and ! error light is on (ES-500W II) The Wi-Fi (white) and ! error lights are flashing slowly (ES-500W II) A network connection error has occurred (the date and time have not been set correctly). Reset the date and time in Web Config. 105