Epson WorkForce WF-2530 Quick Guide - Page 27

Connect the Printer to Your Wireless Network If you are unable to connect to your wireless network using the product CD and the Start Here sheet, you can use the control panel on your product. Before you start, make sure you know your network name (SSID) and password. 1. Press the Wi-Fi Setup button. 2. Press OK to select Wi-Fi Setup Wizard. 3. Press u or d to select the name of your wireless network, then press OK. Continue with step 6. If you don't see your network name, select Other SSIDs, then press OK. You see this screen: 4. Enter your network name (SSID). ■ Press the numeric keypad buttons repeatedly to scroll through characters (uppercase, lowercase, or numbers). ■ If your network name has uppercase (ABC) or lowercase (abc) letters, make sure you enter them correctly. ■ Press r to move the cursor. ■ Press 1 to enter symbols. ■ Press l to delete. 5. Press OK when you're finished entering your network name. 6. If your network has security enabled, you see the password screen: 7. Follow the instructions above to enter the password. If your password has uppercase or lowercase letters, make sure you enter them correctly. 8. Press OK when you're finished entering your password. When the printer is connected to your network, the WiFi light should be green, and not flashing. Make sure you install the software on every computer from which you want to print. When prompted during software setup, select The printer is already on my wireless network. The Product's WiFi Light Is On But You Cannot Print Your router might not be assigning IP addresses automatically using DHCP. If it isn't, you will need to set the product's IP address manually. Make sure it is set correctly for your network. Cannot Scan Over the Network ■ Make sure your computer is connected to the same network as your printer. Network Problems 27