Epson WorkForce WF-7610 User Manual - Page 260

Status Menu Error Codes If a job does not complete successfully, you can check the error code. Press the Status button, select Job History, and locate the incomplete job. Select the job to display the error code and additional information. Code 001 109 110 201 202 203 204 205 206 207 208 301 401 302 402 Condition/solution The product was turned off by a power failure. The received fax was already deleted. The job was printed 1-sided because the loaded paper does not support 2-sided printing. The product's memory is full. You can send pages individually or print received faxes and then delete them to free up memory space. The line was disconnected by the recipient's fax machine. Wait a moment, then try again. The product cannot detect a dial tone. Make sure the phone cable is connected correctly and the phone line works. If you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, turn off the Dial Tone Detection setting. The recipient's fax machine is busy. Wait a moment, then try again. The recipient's fax machine does not answer. Wait a moment, then try again. The phone cable is incorrectly connected to the product's LINE and EXT ports. Connect the phone cable correctly. The phone cable is not connected. Connect the phone cable. The fax could not be sent to some of the specified recipients. Print a fax log to check which recipients failed to receive the fax. You may be able to resend a fax from Job Monitor in the Status Menu. There is not enough storage space available on the external memory device. Clear space on the device or use a different device. The external memory device is write-protected; disable write protection. 260