Epson XP-5100 Users Guide - Page 215
Cleaning and Transporting Your Product, Aligning the Print Head Using the Product Control Panel
View all Epson XP-5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
1 Translucent film 2 Print head rail Caution: Do not touch the flat white cable or the print head rail; otherwise, you may not be able to print. Do not wipe off the grease on the rail. 6. Moisten a cotton swab with the water and detergent mixture and squeeze out any excess moisture. Use it to lightly wipe ink off the translucent film. Caution: Do not press too hard on the film or you may dislocate the anchor springs and damage the product. 7. Use a new, dry cotton swab to dry the translucent film. 8. Repeat steps 6 and 7 as necessary to clean all ink smears. 9. When the translucent film is dry, close the scanner unit. 10. Plug in the power cable and reconnect any interface cables. Parent topic: Cleaning and Transporting Your Product Related tasks Aligning the Print Head Using the Product Control Panel Cleaning the Paper Guide Cleaning the Paper Rollers 215