Epson XP-5200 Users Guide - Page 210
Product Does Not Appear in Mac Printer Window, Solving Network Problems
![]() |
View all Epson XP-5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
• Try accessing any website from your computer to make sure that your computer's network settings are correct. If you cannot access any website, there is a problem on the computer. Check the network connection of the computer. See the documentation provided with the computer for details. Parent topic: Solving Network Problems Related concepts Uninstall Your Product Software Related references Status Icon Information Related topics Wi-Fi Networking Product Does Not Appear in Mac Printer Window If your product does not appear in the Mac printer window, try these solutions: • Turn your product off, wait 30 seconds, then turn it back on again. • If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi icon on your product's LCD screen is not lit, make sure you select one of the WPS options from the product control panel within 2 minutes of pressing the WPS button on your router. • If you are connecting the product wirelessly via EpsonNet Setup and you do not see the Wi-Fi antenna icon with connection bars on your LCD screen, make sure your product software was installed correctly. If necessary, reinstall your software. Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band, give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home Network 5 GHz. See your router documentation or contact your internet service provider for instructions. Parent topic: Solving Network Problems Related references Status Icon Information Related topics Wi-Fi Networking 210
![](/manual_guide/products/epson-xp5200-users-guide-89ad0a6/210.png)