Epson XP-5200 Users Guide - Page 238

Remove any dust or dirt from your originals and clean the scanner glass. Do not press with too much force on the original or document cover. To adjust the colors in your scanned image, adjust these Epson Scan 2 settings (if available) and try scanning again: • If the Image Type setting is Color or Grayscale, adjust the Contrast setting. • If the Image Type setting is Black & White or Grayscale, adjust the Color Enhance setting. Parent topic: Solving Scanned Image Quality Problems Image Consists of a Few Dots Only If your scanned image consists only of a few dots, try these solutions: • Make sure you placed your original for scanning facing the correct way. • If the Image Type setting is Black & White, adjust the Threshold and scan again. • Remove any lint or dirt from your original. • Clean the scanner glass. • Do not press on the original or the document cover with too much force. Parent topic: Solving Scanned Image Quality Problems Related tasks Scanning in Epson Scan 2 Placing Originals on the Scanner Glass Line of Dots Appears in All Scanned Images If a line of dots appears in all your scanned images, try these solutions: • Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not recommended. Caution: Do not spray glass cleaner directly on the scanner glass. • Make sure any interface cables are securely connected at both ends. • Remove any dust or dirt that may have adhered to your original. • Do not press with too much force on the original or the document cover. Parent topic: Solving Scanned Image Quality Problems 238