Epson XP-6000 Users Guide - Page 46
Wi-Fi Protected Setup (WPS), Using WPS to Connect to a Network
View all Epson XP-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen and enter the displayed password. Note: You can also scan the QR Code on the LCD screen to view online setup instructions. 7. When you are finished, scroll down on the product's LCD screen and select OK. 8. Press the home button to return to the Home screen. The Wi-Fi Direct icon displayed on the LCD screen indicates if Wi-Fi Direct is enabled on the product. If your device is not connected, repeat step 6 and make sure you enter the password correctly. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet. Parent topic: Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the home button, if necessary. 2. Select the icon. 46