Eureka RapidClean Step 41A Owners Guide - Page 6

➀ ➀ ENGLISH ASSEMBLY PARTS (Fig 1) ➀ Vacuum Cleaner ➁ Crevice Tool ➁ FIG 1 Assembly / Storage (Fig 2) ➀ Wrap electrical cord around the base of the cleaner. Secure elec- trical plug to cord to prevent cord from unwinding. ➁ Store crevice tool inside the base of the cleaner. How to Use (Fig 3) ➁ CAUTION: Moving parts. Make sure the power switch is in off (O) position before plugging in. ➀ Power Switches FIG 2 ➀ Power Switch ➁ Bare Floor Brush ➁ Nozzle Cover The nozzle features a rotating bare floor brush that covers the brush roll. When the bare floor brush is in the up position, the brushroll can be activated to clean flat, carpeted areas such as stair steps or upholstery. Twist the nozzle down to engage the bare floor brush for cleaning bare, hard surfaces such as uncarpeted stairs. CAUTION:To prevent injury, turn off the power switch and uplug cleaner before rotating the nozzle. ➂ Cleaning Accessories ➊ ➂ Cleaning Accessories CAUTION: Moving brush roll, power switch should be in suction only position when using hose. ➋ ➊ Pull the hose adaptor on cleaner. ➋ Pull the crevice tool out of the base of the cleaner. ➌ Place the crevice tool on the end of the hose. ➍ When cleaning is completed, store crevice tool back in the base of the cleaner and replace the hose in the hose adapter on the cleaner. 6