Fluke 190-502/AM Manual - Page 14
For the BC190/808 universal Power Adapter, Series II ScopeMeter series.
View all Fluke 190-502/AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Fluke 190 Series II Users Manual Warning To avoid electrical shock or fire: • Use only the Fluke power supply, Model BC190 (Power Adapter). • Before use check that the selected/indicated range on the BC190 matches the local line power voltage and frequency. • For the BC190/808 universal Power Adapter only use line cords that comply with the local safety regulations. Note: To accommodate connection to various line power sockets, the BC190/808 universal Power Adapter is equipped with a male plug that must be connected to a line cord appropriate for local use. Since the adapter is isolated, the line cord does not need to be equipped with a terminal for connection to protective ground. Since line cords with a protective grounding terminal are more commonly available you might consider using these anyhow. Warning To avoid electrical shock or fire if a product input is connected to more than 42 V peak (30 Vrms) or 60 V dc: • Use only insulated voltage probes, test leads and adapters supplied with the product, or indicated by Fluke as suitable for the Fluke 190 Series II ScopeMeter series. • Before use, inspect voltage probes, test leads and accessories for mechanical damage and replace when damaged. • Remove all probes, test leads and accessories that are not in use. • Always connect the power adapter first to the ac outlet before connecting it to the product. • Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc. • Do not connect the ground spring (figure 1, item d) to voltages higher than 42 V peak (30 Vrms) from earth ground. • Do not apply more than the rated voltage, between the terminals or between each terminal and earth ground. 6 MyFlukeStore Shop for Fluke products online at: www. .com 1.877.766.5412