Fluke 414D Fluke 414D, 419D, 424D Laser Distance - Manual - Page 22

414D/419D/424D Users Manual Clear Push : • 1x = Clear last value • 2x = Clear all • 2 seconds = Turn off Meter Measurements with a Tripod Measurements with the 419D and 424D that use a tripod  must have the tripod reference set. When set, shows on the display. Reference Point The display shows the reference point for a measurement. The default reference point is from the end of the Meter. If the beeper is on, the Meter beeps as you change the reference point. See Figure 9 for more information. 414D Push  1x to change the reference point between the   front and the end of the Meter. The display shows or . 419D/424D The Meter automatically adjusts the reference point when  you use the endpiece and shows on the display. 16 Push :  • 1x = Measure from front  • 2x = Measure from tripod screw  • 3x = Measure from end Note The tripod mode overrides other reference points. The Meter stays in the tripod mode until you change to a different reference point. 9 Default 1x 2x Auto-detect gwo07.eps