Fluke 434/PWR FE SW43W Users Manual - Page 6
Selecting the Baud Rate, The dialog box shown
View all Fluke 434/PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
SW43W Users Manual 1. Select the Com Port that connects the instrument to the PC. 2. Click Connect to establish a connection with the instrument. Selecting the Baud Rate If you want FlukeView to communicate at another baud rate do the following: 1. In the Instrument Connect menu click on Advanced. The dialog box shown below appears . Note: To see the Instrument Connect menu click toolbar button (most left button): (connect/disconnect) in the 2. Click Disconnect if you are connected. 3. Select the Baud Rate, for example 57600. 4. Click Connect to establish a connection with the instrument. 2
SW43W
Users Manual
2
1.
Select the
Com P
ort
that connects the instrument to the PC.
2.
Click
C
onnect
to establish a connection with the instrument.
Selecting the Baud Rate
If you want FlukeView to communicate at another baud rate do the following:
1.
In the
Instrument Connect
menu click on
A
dvanced
. The dialog box shown
below appears .
Note:
To see the Instrument Connect menu click
(connect/disconnect) in the
toolbar button (most left button):
2.
Click
D
isconnect
if you are connected.
3.
Select the
Baud R
ate
, for example
57
600.
4.
Click
C
onnect
to establish a connection with the instrument.