Fluke 87V FE 83V & 87V Users Manual - Page 40
MIN MAX Recording Mode, Smooth Feature (Power Up Option Only), will appear on the left side
View all Fluke 87V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
80 Series V Users Manual MIN MAX Recording Mode The MIN MAX mode records minimum and maximum input values. When the inputs go below the recorded minimum value or above the recorded maximum value, the Meter beeps and records the new value. This mode can be used to capture intermittent readings, record maximum readings while you are away or record readings while you are operating the equipment under test and cannot watch the Meter. MIN MAX mode can also calculate an average of all readings taken since the MIN MAX mode was activated. To use MIN MAX mode, refer to the functions in Table 7. Response time is the length of time an input must stay at a new value to be recorded. A shorter response time captures shorter events, but with decreased accuracy. Changing the response time erases all recorded readings. Model 83 has 100 millisecond response time; Model 87 has 100 millisecond, and 250 µs (peak) response times. The 250 µs response time is indicated by "p" on the display. The 100 millisecond response time is best for recording power supply surges, inrush currents, and finding intermittent failures. The true average value (AVG) displayed in the 100 ms mode is the mathematical integral of all readings taken since the start of recording (overloads are discarded). 32 The average reading is useful for smoothing out unstable inputs, calculating power consumption, or estimating the percentage of time a circuit is active. Min Max records the signal extremes lasting longer than 100 ms. Peak records the signal extremes lasting longer than 250 µs. Smooth Feature (Power Up Option Only) When the input signal changes rapidly, "smoothing" provides a steadier reading on the display. To use the smooth feature: 1. Hold down C while turning the Meter on. The display will read "5___" until C is released. 2. The smooth icon (g) will appear on the left side of the display to let you know that smoothing is active.