Fluke 87V Getting Started Guide - Page 13

Multimeters The Meter's Features Button D H E Switch Position Any switch position MIN MAX recording Frequency counter Power-up Any switch position Continuity ReE MIN MAX recording Hz, Duty Cycle Power-up Table 4. Pushbuttons (cont.) Function AutoHOLD (formerly TouchHold) captures the present reading on the display. When a new, stable reading is detected, the Meter beeps and displays the new reading. Stops and starts recording without erasing recorded values. Stops and starts the frequency counter. Turns on all LCD segments. Turns the backlight on, makes it brighter, and turns it off. For Model 87, hold H down for one second to enter the HiRes digit mode. The "HiRes" icon appears on the display. To return to the 3-1/2 digit mode, hold H down for one second. HiRes =19,999 Turns the continuity beeper on and off Switches between Peak (250 μs) and Normal (100 ms) response times. Toggles the meter to trigger on positive or negative slope. Disables the beeper for all functions. The Meter reads "bEEP" until E is released. 7