Fluke 87V Getting Started Guide - Page 14
Table 4., Pushbuttons cont, Button, Switch Position, Function, Power-up
![]() |
View all Fluke 87V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
80 Series V Getting Started Manual Button Switch Position F Any switch position (Relative mode) Power-up G Any switch position except diode test Power-up Table 4. Pushbuttons (cont) Function Stores the present reading as a reference for subsequent readings. The display is zeroed, and the stored reading is subtracted from all subsequent readings. Enables zoom mode for the bar graph. Refer to Zoom Mode in the Users Manual located on the 80 Series V User Manuals CD. The Meter reads "2rEL" until F is released. Press G for frequency measurements. Starts the frequency counter. Press again to enter duty cycle mode. Enables the Meter's high impedance mode when the mV dc function is used. The Meter reads "Hi2" until G is released. 8
![](/manual_guide/products/fluke-87v-getting-started-guide-15404a0/14.png)
80 Series V
Getting Started Manual
8
Table 4.
Pushbuttons (cont)
Button
Switch Position
Function
F
(Relative mode)
Any switch position
Power-up
Stores the present reading as a reference for subsequent readings. The display is zeroed, and the stored reading
is subtracted from all subsequent readings.
Enables zoom mode for the bar graph. Refer to Zoom Mode in the Users Manual located on the 80 Series V User
Manuals CD. The Meter reads “
2rEL
” until
F
is released.
G
Any switch position
except diode test
Power-up
Press
G
for frequency measurements.
Starts the frequency counter.
Press again to enter duty cycle mode.
Enables the Meter’s high impedance mode when the mV dc function is used.
The Meter reads “
Hi2
” until
G
is released.