Fluke N4K 2PP42I Product Manual - Page 70
Con Start, Adjust Date and Time.
View all Fluke N4K 2PP42I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
NORMA 4000/5000 Operators Manual Menu Integration Setup, second field column State is highlighted. 1. Press Enter, select AUTO and confirm with Enter. Clear values at start is now enabled. If you want to change it, select MAN and confirm with Enter. 2. Save the configuration settings by pressing the SAVE function key. Note In the factory configuration 1:W3 the function clear manual (MAN) is preselected. Configure Start You can select different start conditions: Column Trig at after Settings Remote time key -Date- - Description Start via Interface command Start on date and time Start when key pressed (Key F1) Start time(only active at Trig time) No function Menu Integration Setup, first field column Trig is highlighted. 1. Press Enter, select start condition and confirm with Enter. 2. Start condition is now set. If you have selected a time to start (time) enter the time in the column at. Proceed as described below: Menu Integration Setup, first field column at is highlighted. 1. Press Enter, select year, month, day, hour minute and seconds with the cursors and confirm with Enter. Start time is now set. 2. Save the configuration settings by pressing the SAVE function key.. Note Date and time for start is taken from the clock in the unit. Correct the date and time of the unit before you start the integration calculation (chapter 7 "Adjust Date and Time"). 7-22 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664