Foxconn 720MX-K English Manual - Page 28
System Information
View all Foxconn 720MX-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
System Information This submenu is used to set up the standard BIOS features, such as the date, time, floppy drive and so on. Use the arrow up/down keys to select an item, then use the or keys to change the setting. Phoenix - AwardBIOS CMOS Setup Utility System Information Date (mm:dd:yy) Fri, Feb 29 2008 Item Help Time (hh:mm:ss) 17 : 44 : 13 Menu Level ► ► IDE Channel Master [ Maxtor 6Y080L0] ► IDE Channel Slave [ None ] Change the day, month, ► SATA Channel 1 Master [ None ] year and century ► SATA Channel 2 Msater [ None ] ► SATA Channel 3 Master [ None ] ► SATA Channel 4 Master [ None ] Drive A [1.44M, 3.5 in.] Halt On [All , But Keyboard] Model Name M78MX BIOS Version D18 Memory 1024M MAC Address 00 1C 25 3B CC AF AMD Phenom(tm) 9500 Quad-Core Processor 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Date - format Day-weekday from Sun. to Sat., automatically displayed by BIOS (Read Only). Month-month from 1 to 12. Date-date from 1st to 31st. Year-year, set up by users. Use , keys to select a field. Use , , or to select a value. ► Time - : : format This item allows you to configure the desired time. Use , to move forward and select a field. Directly input a value or use , , or to select a value. ► IDE Channel Master / Slave These categories identify the hard disks connected to the PATA port in the system. In each channel's display, you can press [Enter] to go to its submenu. You can further configure specific drive settings. [None] and [Auto] settings allow you to enable or disable this drive. [None] means no HDD is installed or set, and [Auto] means the system can auto-detect the hard disk when booting up. In Access Mode setting, selections of [CHS], [LBA], [Large] and [Auto] can help you to select hard drive for legacy compatibility. Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large. CHS LBA Large For HDD 528MB & Supporting LBA (Logical Block Addressing) For HDD>528MB but not supporting LBA Note: Set to [Auto] , the system can detect the hard disk and select the HDD mode automatically. Suggest you select this option. 21