Foxconn 720MX-K English Manual - Page 32

Fox Intelligent Overclock Phoenix - AwardBIOS CMOS Setup Utility Fox Intelligent Overclock CPU Clock PCIE Clock [200] Item Help [100] Menu Level ► 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► CPU Clock / PCIE Clock These items allow you to select different CPU clock and PCIE clock. ► NPT FID Control (Appears only when CPU supports) This is CPU multiplier. It allows you to configure CPU's speed much easier. This option will be displayed only if your CPU is supporting this feature. Memory Timing Setting Phoenix - AwardBIOS CMOS Setup Utility Memory Timing Setting Timing Mode x Memory Clock Value Limit SPD Checksum Restart CKE Base Power Down Mode CKE Base Power Down Memclock Tri-stating Memory Hole Remapping Auto Optimize Bottom IO x Bottom of [31:24] IO Space Bottom of UMA DRAM [31:24] Memory Timing Setting x TwTr Command Delay x Trfc0 for DIMM0 x Trfc1 for DIMM1 x [Twr] Write Recovery Time x [Trtp] Precharge Time x [Trc] Row Cycle Time x [Trcd] RAS to CAS R/W Delay x [Trrd] RAS to RAS Delay [A uuttoo] Item Help DDR 400 [Ignore] Menu Level ► [Disabled] [Per Channel] Auto, no user limit [Disabled] MaxMemCLK, limit by [Enabled] memory clock value [Enabled] D0 [FC] [Disabled] 3 Bus Clocks 195ns 195ns 6 Bus Clocks 3 Clocks 26 Bus Clocks 6 Clocks 5 Clocks Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Timing Mode This item allows you to set the memory timing mode. The available options are: [Auto]: System will detect the timing automatically; [MaxMemCLK]: The memory timing is limited by the memory clock value set in the next item. 25