Foxconn A7VML English Manual. - Page 101
Press [Ctrl-F] to enter the Option ROM Utility setup and configure the mirrored RAID, In Windows,
View all Foxconn A7VML manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
2. Select a RAID array for use (also can refer to section 5-3) After rebooting your computer, you will see the RAID software prompting you to press [Ctrl-F]. Press [Ctrl-F] to enter the Option ROM Utility setup and configure the mirrored RAID array as described in the 5-3 section. Finally, you can reach this step as depicted. Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. [ Define LD Menu ] LD No RAID Mode Total Drv Capacity(GB) Status LD 1 LD 2 LD 3 LD 4 LD 5 LD 6 LD 7 LD 8 LD 9 LD10 RAID 01 2 126439.9.999 FunFcutinocntaiolnal [ Keys Available ] [↑] Up [↓] Down [ESC] Exit [Enter] Select 3. Exit Option ROM Utility and restart computer to go to Windows. 4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard". Use driver CD and click on "AMD RAID Driver" to install the AMD RAID driver. The RAID driver will be installed only when you select "RAID" in "OnChip SATA Type" setting. If you do not select RAID, then RAID driver will not be installed. 5 94