Foxconn P43AL-V English Manual. - Page 24

Serial ATA Connectors : SATA_1/2/3/4/5/6, Fan Connectors : CPU_FAN, SYS_FAN, NB_FAN

Page 24 highlights

2 SPDIF_OUT Connector : SPDIF_OUT2 Short for Sony/Philips Digital InterFace, a standard audio file transfer format. Jointly developed by the Sony and Phillips corporations, S/PDIF allows the transfer of digital audio signals from one device to another without having to be converted first to an analog. format. Maintaining the viability of a digital signal prevents the quality of the signal from degrading when it is converted to analog. 1 +5V 2 EMPTY 3 SPDIF_OUT 4 GND SPDIF OUT2 Serial ATA Connectors : SATA_1/2/3/4/5/6 The Serial ATA connector is used to connect with SATA Hard Disk or CD devices which support this feature. The current Serial ATA II interface allows up to 300MB/s data transfer rate. 1 GND TX+ TXGND RXRX+ GND SATA_1/2/3/4/5/6 Fan Connectors : CPU_FAN, SYS_FAN, NB_FAN There are three main fan headers on this motherboard. The fan speed can be controlled and monitored in "PC Health Status" section of the BIOS Setup. These fans can be automatically turned off after the system enters S3, S4 and S5 sleeping states. 1 GND POWER SENSE CONTROL CPU_FAN/ SYS_FAN/ NB_FAN 17 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

17
2
17
SPDIF_OUT Connector : SPDIF_OUT2
Short for
S
ony/
P
hilips
D
igital
I
nter
F
ace, a standard
audio file transfer format. Jointly developed by the
Sony and Phillips corporations, S/PDIF allows the
transfer of digital audio signals from one device to
another without having to be converted first to an ana
-
log. format. Maintaining the viability of a digital signal
prevents the quality of the signal from degrading when
it is converted to analog.
Serial ATA Connectors : SATA_1/2/3/4/5/6
The Serial ATA connector is used to connect with SATA
Hard Disk or CD devices which support this feature.
The current Serial ATA II interface allows up to 300MB/s
data transfer rate.
Fan Connectors : CPU_FAN, SYS_FAN,
NB_FAN
There are three main fan headers on this motherboard.
The fan speed can be controlled and monitored in “PC
Health Status” section of the BIOS Setup. These fans
can be automatically turned off after the system enters
S3, S4 and S5 sleeping states.
SATA_1/2/3/4/5/6
GND
TX+
TX-
GND
RX-
RX+
GND
1
CPU_FAN/ SYS_FAN/ NB_FAN
GND
POWER
SENSE
CONTROL
1
1
2
3
4
+5V
EMPTY
SPDIF_OUT
GND
SPDIF OUT2