Foxconn P43AL-V English Manual. - Page 35

O.C. Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. O.C. Configuration Spread Spectrum [ Enabled] Help Item CPU Clock [333] PCI Express Clock [100] Options CPU: DRAM Clock Ratio [Disabled] I Target Memory Speed :667MHz Disabled *********** Over Clock Step Up Enabled Start CPU Clock: 333MHz Next CPU Clock: 338MHz Status: Stopped. Step of Setup Over Clock [ 5] Run Setup Over Clock [Press Enter] 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Spread Spectrum If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference) generated by the system, so to comply with FCC regulation. But if overclocking is activated, you had better disable it. ► CPU Clock This option is used to adjust the CPU clock. ► PCI Express Clock This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card speed. ► CPU:DRAM Clock Ratio This option is used to select the clock ratio between CPU and DRAM. The normal memory speed of DDR2 is equal to twice that of DRAM clock. [Auto]: Set CPU:DRAM clock ratio automatically according to the range of CPU clock. [Disabled]: Set CPU:DRAM ratio as real ratio. You also can select the CPU:DRAM ratio manually through the options: [1:1.25], [1:1.66], [1:1], [1:0.83]. ***********Over Clock Step Up Start CPU Clock This displays the current CPU clock value under overclocking test. ► Next CPU Clock This displays the next CPU clock value which will be used in overclocking test. ► Status This displays the overclocking state. It can be "Running" or "Stopped.". ► Step of Setup Over Clock This is the clock step increment when running overclock test. It is implemented in running "Run Setup Over Clock" option, that CPU will start its overclocking by stepping this value. Item value ranges from 1 to 15. You can change the value by pressing keys [+]/[-] or inputting the value directly. 28