Foxconn P43AL-V English Manual. - Page 32

3 CPU Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. CPU Configuration Configure advanced CPU settings Module Version:3F.11 Help Item Manufacturer : Intel It is available Intel(R) Core(TM)2 Quad CPU Q9300 @2.50GHz only when the CPU Speed : 2.50GHz is not the XE CPU FSB Speed : 1333MHz and EIST is enabled. Cache L1 :128 KB Cache L2 :6144KB Ratio Status:Unlocked (Min:06, Max:07.5) Ratio Actual Value:7.5 Super Clock Free C1E Function Hardware Prefetcher Adjacent Cache Line Prefetch Limit CPUID MaxVal Virtualization Technology Execute Disable Bit [Disabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] [Enabled] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Super Clock Free When it is enabled, this item is used to adjust the multiplier of the CPU samples. ► C1E Function C1E represents Enhanced HALT State. It is a feature which Intel CPU uses to reduce power consumption when in halt state. C1E drops the CPU's multiplier and voltage to lower levels when a HLT (halt) command is issued. This item is used to enable/disable the C1E support. When disabled, the processor will only retrieve the currently requested cache line. ► Hardware Prefetcher The processor has a hardware prefetcher that automatically analyzes its requirements and prefetches data and instructions from the memory into the Level 2 cache that are likely to be required in the near future. This reduces the latency associated with memory reads. When enabled, the processor's hardware prefetcher will be enabled and allowed to automatically prefetch data and code for the processor. When disabled, the processor's hardware prefetcher will be disabled. ► Adjacent Cache Line Prefetcher (Appears only when CPU supports) The processor has a hardware adjacent cache line prefetch mechanism that automatically fetches an extra 64-byte cache line whenever the processor requests for a 64-byte cache line. This reduces cache latency by making the next cache line immediately available if the processor requires it as well. When enabled, the processor will retrieve the currently requested cache line, as well as the subsequent cache line. ► Limit CPUID MaxVal This item is used to enable or disable CPUID maximum value limit configuration. Set Limit CPUID MaxVal to 3, it should be [Disabled] for WinXP. ► Virtualization Technology Virtualization (i.e. Intel® Vanderpool Technology) allows a platform to run multiple operating systems and applications in independent partitions or "containers." One physical compute system can function as multiple "virtual" systems. Vanderpool Technology can help improve future virtualization solutions. This item will be displayed only when the CPU is supporting this 25