Frigidaire FGGF3685TS Complete Owner s Guide - Page 10
Before Setting Surface Controls
View all Frigidaire FGGF3685TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
BEFORE SETTING SURFACE CONTROLS Gas Surface Burners Your gas appliance is equipped with different sized surface burners. The ability to heat food quicker and in larger volumes increases as the burner size increases. It is important to select cookware that is suitable for the amount and type of food being prepared. The smaller simmer burner (5k) is best suited for simmering delicate sauces, etc. Use middle oval burner (10k), left rear burner (9.5k), or left front burner (15k) for most cooking needs. The larger power burners at the front right (18.2k) is recommended for bringing large quantities of liquid to temperature and when preparing larger quantities of food. Burner Cap Burner Head Burner Cap Lip 9.5k9.5k 1IN5kA9C.5TkIVE 10k 5k 5k 14.2k 18k Correct Burner Cap Placement Incorrect Burner Cap Placement Deep drawn / upswept top / cast grates Figure 1: Burner sizes and location Burner Caps and Burner Grates Assembly To prevent flare-ups use the cooktop with all burner caps properly installed. Place a burner cap on each burner head, matching the cap size to the head size. The cap for each burner has an inner locating ring which centers the cap correctly on the burner head. Be sure that all the burner caps and burner heads are correctly placed before using your appliance. If the burner cap is not assembled properly, the burner will not light. Make sure each burner cap is properly aligned and level.Turn the burner on to determine if it will light. If the burner does not light, contact the installer. Do not service the sealed burner yourself. ATTENTION: Do not slide the burner caps on the cooktop, doing so can damage the surface. 10