Frigidaire FGGF3685TS Complete Owner s Guide - Page 30

keep warm: KEEP WARM

Page 30 highlights

OVEN CONTROLS To set how the oven will operate once the probe reaches the target temperature: The oven is preset to automatically stop cooking and start the warm feature when probe sensor reaches the target temperature. This may be set to continue cooking if desired. Setting the options must be done when the oven is inactive. The probe is not required to be connected to the probe receptacle when setting this option. To set the oven to continue cooking after reaching the target temperature: 1. Press probe key and hold for 6 seconds. 2. Press self clean key and toggle until Continu: appears, as shown in Figure 27, then press start to accept. Keep Warm Keep Warm should only be used with foods that are already at serving temperatures. Keep warm will keep cooked foods warm and ready for serving for up to 3 hours after cooking has finished. After 3 hours the keep warm will shut-off automatically. Keep warm will keep the oven temperature at 170° F (77°C). To set keep warm: 1. If needed, arrange oven racks and place cooked food in oven. 2. Press keep warm: KEEP WARM will appear in the display. (If no other keys are touched within 25 seconds the request for keep warm will clear.) 3. Press start. Keep warm will automatically turn on and then turn off after 3 hours unless cancelled. To turn keep warm off at any time, press off. Figure 27: Probe set to continue cooking To set the oven to automatically stop cooking and start warm once reaching target temperature: 1. Press probe key and hold for 6 seconds. 2. Press the self clean key and toggle until CAnCEL appears, as shown in Figure 28, then press start to accept Figure 28: Probe set to cancel cooking Probe too hot message: When the message Prob... Too... Hot... flashes in the display, the probe temperature has exceeded 250°F (121°C). If the probe is not removed, this message may continue until the sensor reaches 300°F (149°C) or higher, and oven will automatically turn off. Be sure the probe sensor is fully covered by the food. WARNING Food poisoning hazard. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. To add keep warm to turn ON after baking 45 minutes with a set temperature of 425°F: 1. Press bake time. 2. Enter 45 using numeric keypad. 3. Press start. 4. Press Bake and enter 425 on numeric keypad. 5. Press start to accept. 6. Press keep warm. KEEP WARM will appear in the display. 7. Press start. When the bake time is over, keep warm will automatically turn ON. The keep warm function will automatically turn OFF after 3 hours. Important note: • Keep Warm will maintain the oven temperature at 170° F (77°C) for 3 hours. Keep Warm may be set when finished cooking or may be added to automatically turn on after cooking using bake time. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

30
OVEN CONTROLS
To set how the oven will operate once the probe
reaches the target temperature:
T
he oven is preset to automatically stop cooking and start
the warm feature when probe sensor reaches the target
temperature. This may be set to continue cooking if desired.
Setting the options must be done when the oven is inactive.
The probe is not required to be connected to the probe
receptacle when setting this option.
To set the oven to continue cooking after reaching the
target temperature:
1.
Press
probe
key and hold for 6 seconds.
2.
Press
self clean
key and toggle until
Continu:
appears, as shown in
Figure 27
, then press
start
to
accept
.
To set the oven to automatically stop cooking and start
warm once reaching target temperature:
1.
Press
probe
key and hold for 6 seconds.
2.
Press the
self clean
key and toggle until
CAnCEL
appears, as shown in
Figure 28
, then press
start
to
accept
Probe too hot message:
When the message
Prob... Too... Hot...
flashes in the
display, the probe temperature has exceeded 250°F
(121°C). If the probe is not removed, this message may
continue until the sensor reaches 300°F (149°C) or higher,
and oven will automatically turn off. Be sure the probe
sensor is fully covered by the food.
Keep Warm
K
eep Warm should only be used with foods that are already
at serving temperatures. Keep warm will keep cooked foods
warm and ready for serving for up to 3 hours after cooking
has finished. After 3 hours the keep warm will shut-off auto-
matically. Keep warm will keep the oven temperature at
170° F (77°C).
To set keep warm:
1.
If needed, arrange oven racks and place cooked food in
oven.
2.
Press
keep warm: KEEP WARM
will appear in the
display. (If no other keys are touched within 25 seconds
the request for keep warm will clear.)
3.
Press
start
.
Keep warm
will automatically turn on and
then turn off after 3 hours unless cancelled.
To turn keep warm off at any time, press
off
.
To add keep warm to turn ON after baking 45 minutes
with a set temperature of 425°F:
1.
Press
bake time
.
2.
Enter
45
using numeric keypad.
3.
Press
start
.
4.
Press
Bake
and enter
425
on numeric keypad.
5.
Press
start
to accept.
6.
Press
keep warm
.
KEEP
WARM
will appear in the
display.
7.
Press
start
. When the bake time is over, keep warm will
automatically turn ON. The keep warm function will
automatically turn OFF after 3 hours.
Important note:
Keep Warm will maintain the oven temperature at 170°
F (77°C) for 3 hours. Keep Warm may be set when
finished cooking or may be added to automatically turn
on after cooking using bake time.
Figure 27:
Probe set to continue cooking
Figure 28:
Probe set to cancel cooking
Food poisoning hazard. Do not let food sit for more than
one hour before or after cooking. Doing so can result in
food poisoning or sickness.
WARNING