Frigidaire FGGS3065PF Installation Instructions - Page 3
NOTES, Product Dimensions - installation
View all Frigidaire FGGS3065PF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS (Models with Sealed Top Burners) Product Dimensions 21¾" Do not (55.25 cm) install the unit in the cabinet before reading C next two pages. Door Open (see note 5) A D B Side Panel A. HEIGHT (Under Cooktop) B. C. D. TOTAL DEPTH WIDTH COOKTOP TO FRONT OF WIDTH RANGE 35 7/8" (91,1 cm) 30" 31 ½" 36 5/8" (93 cm) (76,2 cm) (80 cm) 28 5/16" (71,9 cm) E. CUTOUT WIDTH (Countertop and cabinet) 30±1/16" (76,2±0,15 cm) F. CUTOUT DEPTH G. HEIGHT OF COUNTERTOP 21 3/4" (55,2 cm) Min. 36 5/8" (93 cm) Max. 22 1/8" (56,2 cm) Max 35 7/8" (91,1 cm) Min. 24" (61 cm) Min. with backguard NOTES: 1 Do not pinch the power supply cord or the flexible gas conduit between the range and the wall. 2 Do not seal the range to the side cabinets. 3 24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the bottom of wood or metal cabinet is protected by not less than 1/4" (0,64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0,015" (0,4 mm) stainless steel, 0,024" (0,6 mm) aluminum, or 0,020" (0,5 mm) copper. 30" (76,2 cm) minimum clearance when the cabinet is unprotected. 4 For cutouts below 22 7/8" (58,1 cm), appliance will slightly show out of the cabinet. 5 Allow at least 19 ¼" (48.9 cm) clearance for door depth when it is open. 3