Fujitsu 4120C Operating Guide - Page 85
Cleaning the ADF - power adapter
UPC - 097564304286
View all Fujitsu 4120C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
5.2 Cleaning the ADF As a rule, clean the ADF every 1,000 scanned sheets. This, however, depends on the type of document you are scanning. For example, the ADF sometimes must be cleaned more frequently when toner has not sufficiently adhered to the document. CAUTION When the scanner is in use, the surface of the glass inside the ADF becomes hot. Before cleaning ADF, disconnect the AC adapter from the power outlet, and wait at least 15 minutes for the glass to cool down. I Cleaning the ADF The following parts needs to be cleaned in the ADF unit: •Pad ASY •Pick roller •Feed roller •Plastic roller •Sheet guide • Glass 58 5.2 Cleaning the ADF
58
5.2
Cleaning the ADF
5.2
Cleaning the ADF
As a rule, clean the ADF every 1,000 scanned sheets. This,
however, depends on the type of document you are scanning. For
example, the ADF sometimes must be cleaned more frequently
when toner has not sufficiently adhered to the document.
■
Cleaning the ADF
The following parts needs to be cleaned in the ADF unit:
•
Pad ASY
•
Pick roller
•
Feed roller
•
Plastic roller
•
Sheet guide
•
Glass
When the scanner is in use, the surface of the
glass inside the ADF becomes hot.
Before cleaning ADF, disconnect the AC
adapter from the power outlet, and wait at
least 15 minutes for the glass to cool down.