Fujitsu 5120C Getting Started Guide - Page 13

The factory default setting for SCSI ID is HINT "5". If the SCSI ID of another SCSI device is set to the same ID, change either the scan- ner's SCSI ID or SCSI ID of the other SCSI device. Set the SCSI ID using the SCSI ID switch on the back of the scanner. 23 78 456 Click 901 2.3 Installing the Scanner Application For scanning documents with this scanner, both scanner driver and image capturing application software (called "application" hereafter) must be installed on your PC. The following scanner drivers and applications are provided: • Scanner Driver: FUJITSU TWAIN 32 Scanner Driver FUJITSU ISIS Scanner Driver • Scanning application: ScandAll 21 (for FUJITSU TWAIN 32) QuickScan ProTM (for FUJITSU ISIS) Install the appropiate scanner driver for the application you will use. The following sections descri be installation of each driver and application. For FUJITSU TWAIN32 Scanner Driver ■ Preparation Confirm the following items before installing the application. • Take out the Setup CD-ROM from its package, but do not insert the Setup CD-ROM into the CD driver yet. • Connect the scanner correctly to your PC. For details on how to connect the scanner, HINT refer to "2.2 Connecting the Scanner to Your PC" on page 4. ATTENTION Uninstall [Scanner Utility for Microsoft Windows] from [Add/Remove Programs] of the control panel. • There are two types of FUJITSU TWAIN 32: One of the following driver software will be installed automatically according to your Operating System (OS). †For Windows 98, Windows Me, Windows 2000, and Windows XP: FUJITSU TWAIN32 V9 †For Windows 95, Windows NT 4.0: FUJITSU TWAIN32 V8 ASPI Manager V4.01 or later is required (generally comes with SCSI board products). ■ Installing the FUJITSU TWAIN32 Scanner Driver Windows XP screenshots are used in this sec- HINT tion as examples. The windows and opera- tions may slightly vary, if your OS is other than Windows XP. 1. Press the power button to turn on the scanner. 2. Turn on your PC and log on to Windows. ATTENTION When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (privileges of the administrator of your PC). 3. If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. Click [Cancel] to close the Wizard window. • Uninstall any older versions of FUJITSU TWAIN 32 driver if already installed. fi-5120C/fi-5220C Image Scanner Getting Started 5