Fujitsu MHM2200AT Manual/User Guide - Page 213
Read-Ahead Cache, 6.5.1 Data buffer configuration, 6.5.2 Caching operation
View all Fujitsu MHM2200AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Operations An unrecoverable write error occurs during write error retry, automatic alternate assignment is performed. 6.5 Read-Ahead Cache After read command which involves read data from the disk medium is completed, the read-ahead cache function reads the subsequent data blocks automatically and stores the data to the data buffer. When the next command requests to read the read-ahead data, the data can be transferred from the data buffer without accessing the disk medium. The host can thus access data at higher speed. 6.5.1 Data buffer configuration The drive has a 2 MB data buffer. The buffer is used by divided into three parts; for read commands, for write commands, and for MPU work (see Figure 6.9). 2 MB (2,097,152 bytes) for read commands for write commands for MPU work 1,048,576 bytes (2048 sector) 983,040 bytes (1920 sector) 65,536 bytes Figure 6.9 Data buffer configuration The read-ahead operation is performed at execution of the READ SECTOR(S), READ MULTIPLE, or READ DMA command, and read-ahead data is stored in the buffer for read commands. 6.5.2 Caching operation Caching operation is performed only at issuance of the following commands. The device transfers data from the data buffer to the host system at issuance of following command if following data exist in the data buffer. • All sectors to be processed by the command • A part of data including load sector to be processed by the command When a part of data to be processed exist in the data buffer, remaining data are read from the medium and are transferred to the host system. (1) Commands that are object of caching operation Follow commands are object of caching operation. 6-14 C141-E104-03EN