Fujitsu ST4121 User Guide - Page 19
Battery, Access, Mode/State, LED State, Remarks, Table 1-2, System Status Indicators
View all Fujitsu ST4121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started In the following table, a "blinking" LED flashes at the rate of once per second; an LED that is "blinking, slow" flashes at the rate of one second on, five seconds off. Icon Mode/State LED State Remarks Battery HDD Access • On State Green, continuous • Idle Mode Amber, continuous Red, continuous Red, blinking • Suspend-to-RAM, without AC adapter • Suspend-to-RAM with AC adapter Green, blinking slow Amber, blinking slow Red, blinking slow • Hibernate Off (Save-to-Disk), with AC adapter • Off State • Hibernate (Save-to-Disk), without AC adapter • On State (or flashing) • Idle Mode • Suspend-to-RAM • Hibernate (Save-to-Disk) • Off State Green Off Battery charge is between 50%-100% Battery charge is between 13%-49% Battery charge is between 0%-12% There is a battery error. Battery charge is between 50%-100%. Battery charge is between 13%-49%. Battery charge is between 0%-12%. Battery is not installed, or system is off or in Hibernate mode. If battery is inserted during power off, LED blinks amber for 4 seconds to detect battery. Battery status is displayed for 5 seconds after that. Displayed when hard disk drive is accessed. Hard disk drive is not being accessed. Table 1-2 System Status Indicators 9