Ganz Security HSW-H37-4 ZN1-V4FN4 (IP Pinhole) Camera Manual - Page 12
Surface Installation for pan/tilt adjustment
View all Ganz Security HSW-H37-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PixelPro GXi Series ZN1-V4FN3/FN4 Installation Guide Surface Installation for pan/tilt adjustment 1) Drill a hole on a desired installation surface, and insert an anchor block into the hole. 2) Fix the pan/tilt bracket by inserting the tapping screw (M4x25) to be passed through the screw hole on the bracket and tightening it into the anchor block. mount ring rotate ring 3) Insert the rotate ring into the bracket by pressing it into the bracket's mount ring. 4) Place the camera unit on the pan/tilt bracket. 5) Place the surface mount bracket on top of the camera, fix the bracket by inserting the tapping screws (M3x6) into the screw holes on the bracket by aligning the screw holes with the holes on the rotate ring on the pan/tilt bracket, and tighten the screws. cable clamp 6) Use the cable clamp optionally if you want to fix the camera's cable to a desired spot with a tapping screw (M4x20). 06-2014-B 12