Ganz Security HSW-H37-4 ZN1-V4FN4 (IP Pinhole) Camera Manual - Page 9

PixelPro GXi Series ZN1-V4FN3/FN4 Installation Guide 4. INSTALLATION The installation method of ZN1-V4FN3 and ZN1-V4FN4 is identical. The installation method of the camera unit differs depending on your bracket type, but the rest of the overall installation process is the same. 4.1. Camera Unit Installation There are three different ways to install the camera unit: - Covertly behind the wall or ceiling by using the covert cover - Mounted and fixed on the wall or ceiling by using the surface mount bracket - Mounted and fixed on the wall or ceiling by using the pan/tilt bracket to enable the camera's angle adjustment Covert Installation (Behind the wall or above the ceiling) 1) Drill a hole with 3mm diameters on a desired spot where the camera lens will be located. tape groove Screw hole 2) Peel off one side of the double-sided tape, and attach it to the flat surface of the covert cover by aligning the grooves on the tape with the screw holes on the covert cover. 06-2014-B 9