Garmin 17x Installation Instructions (Multilingual) - Page 5

EN GPS 17x NMEA 0183 HVS + - Battery Fuse 12 Vdc 1A Red Black Orange > Gray > White/Red White > White/ Orange Power Ground ACC On Rx A(+) > Rx B(-) > Tx A(+) Tx B(-) > NMEA 0183 Compliant Device > > GPS 17x NMEA 0183 HVS Wired for Two-Way Communication Exceptions: • If your NMEA 0183-compliant device has only one receiving wire (Rx), connect it to the gray wire (Tx/A) from the GPS 17x antenna, and leave the white/red wire (Tx/B) from the antenna unconnected. • If your NMEA 0183-compliant device has only one transmitting wire (Tx), connect it to the white wire (Rx/A) from the GPS 17x antenna, and connect the white/orange wire (Rx/B) to ground. Note: The orange (accessory on) wire is used when wiring the GPS 17x to a Garmin chartplotter, or other NMEA 0183 device that has a defined accessory signal wire. If you are wiring the GPS 17x to a device that does not have an accessory signal wire, the orange wire from the GPS 17x should be connected to ground. caution: If you are wiring the GPS 17x to a device that does not have an accessory signal wire, connect the GPS 17x power wire to the ignition or install an in-line switch. The GPS 17x can drain the battery of the boat if it is not switched. Step 3: Update Your Chartplotter To ensure compatibility with the GPS 17x, upgrade your Garmin chartplotter with the latest software. For more information, visit www.garmin.com. Specifications Physical Dimensions: 3 /19 32 in. (91.6 mm) Diameter × 1 /15 16 in. (49.5 mm) High Weight: 7.1 oz. (201 g) Power/data cable: 30 ft. (9.14 m) Temperature range: -22°F (-30°C) to 176°F (80°C) Case Material: Fully gasketed, highimpact plastic alloy, waterproof to IEC 529 IPX7 standards Power Power input source: 8-33 Vdc unregulated Input current: 40 mA at 12 Vdc Accuracy GPS: