Garmin Edge 500 Owner's Manual - Page 32
Third-Party ANT+ Sensors, Calibrating Your Power Meter, Viewing Your Power Zones
UPC - 753759096700
View all Garmin Edge 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ANT+ Sensors Third-Party ANT+ Sensors For a list of third-party ANT+ sensors that are compatible with the Edge, go to www.garmin.com/intosports. Calibrating Your Power Meter For calibration instructions specific to your power meter, refer to the manufacturer's instructions. Before you can calibrate your power meter, it must be properly installed and actively recording data. 1. Press and hold MENU. 2. Select Settings > Bike Settings > [Bike 1] > ANT+ Power > Calibrate. 3. Keep your power meter active by pedaling until the message appears. Viewing Your Power Zones You can set seven custom power zones using Garmin Connect or Garmin Training Center. If you know your FTP (functional threshold power) value, you can enter it and allow the software to calculate your power zones automatically. 1. Press and hold MENU. 2. Select Settings > Bike Settings > [Bike 1] > Power Zones. Non-Zero Averaging for Power Data The non-zero data-averaging setting is available if you are training with an optional power meter. The default setting is to exclude zero values that occur when you are not pedaling. To turn the non-zero averaging on or off, press and hold MENU, and select Settings > Bike Settings > Data Avg. 28 Edge 500 Owner's Manual