Garmin Edge Explore 1000 Owners Manual - Page 16

3 Select a display speed. Changing the Start Notice This feature automatically detects when your device has acquired satellites and is moving. It is a reminder to start the timer so you can record your ride data. 1 Select > Activity Settings. 2 Select Start Notice. 3 Select an option: • Select Once. • Select Repeat > Repeat Delay to change the amount of time to delay the reminder. System Settings Select > System. • GPS Settings (GPS Settings, page 12) • Color Settings (Changing the Accent Color, page 12) • Display Settings (Display Settings, page 12) • Incident Detection Settings (Turning Incident Detection On and Off, page 5) • Data Recording Settings (Changing the Data Storage Location, page 7) • Unit Settings (Changing the Units of Measure, page 12) • Tone Settings (Setting the Device Tones, page 12) • Language Settings (Changing the Device Language, page 12) GPS Settings Changing the Satellite Setting For increased performance in challenging environments and faster GPS position location, you can enable GPS and GLONASS. Using GPS and GLONASS reduces battery life more quickly than using only GPS. 1 Select > System > GPS > GPS Mode. 2 Select an option. Setting Your Elevation If you have accurate elevation data for your present location, you can manually calibrate the altimeter on your device. 1 From the home screen, select > System > GPS > Set Elevation. 2 Enter the elevation, and select . Viewing Satellites The satellite page shows your current GPS satellite information. For more information about GPS, go to www.garmin.com /aboutGPS. From the home screen, select > System > GPS > View Satellites. GPS accuracy appears at the bottom of the page. The green bars represent the strength of each satellite signal received (the number of the satellite appears below each bar). Changing the Accent Color You can change the accent color on the device. 1 Select > System > Color. 2 Select an accent color. Display Settings Select > System > Display. Auto Brightness: Automatically adjusts the backlight brightness based on the ambient light. Backlight Timeout: Sets the length of time before the backlight turns off. Color Mode: Sets the device to display day or night colors. You can select Auto to allow the device to automatically set day or night colors based on the time of day. Orientation: Sets the device to display in portrait or landscape mode. Screen Capture: Allows you to save the image on the device screen. Changing the Units of Measure You can customize units of measure for distance and speed, elevation, temperature, weight, position format, and time format. 1 Select > System > Units. 2 Select a measurement type. 3 Select a unit of measure for the setting. Setting the Device Tones From the home screen, select > System > Tones. Changing the Device Language From the home screen, select > System > Language. Changing the Configuration Settings You can modify all of the settings you configured in the initial setup. 1 Select > System > Device Reset > Initial Setup. 2 Follow the on-screen instructions. Time Zones Each time you turn on the device and acquire satellites, the device automatically detects your time zone and the current time of day. Device Information Specifications Edge Specifications Battery type Rechargeable, built-in lithium-ion battery Battery life 15 hours, typical usage Operating temperature From -20º to 60ºC (from -4º to 140ºF) range Charging temperature From 0º to 40ºC (from 32º to 104ºF) range Radio frequency/ protocol Water rating 2.4 GHz ANT+ wireless communications protocol Bluetooth Smart wireless technology Wi‑Fi wireless technology IEC 60529 IPX7* *The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com /waterrating. Remote Specifications Battery type User-replaceable CR2032 (3 V) Battery life Up to 1.5 yr. (1 hr./day) Operating temperature From -10° to 50°C (from 14° to 122°F) range Radio frequency/protocol 2.4 GHz ANT+ wireless communications protocol Water rating 5 ATM* *The device withstands pressure equivalent to a depth of 50 m. For more information, go to www.garmin.com/waterrating. 12 Device Information