Garmin Forerunner 910XT Owners Manual - Page 27
About Foot Pod Calibration, Calibrating Your Foot Pod by, Distance, Settings, Foot Pod, Calibrate - ant
View all Garmin Forerunner 910XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
About Foot Pod Calibration Calibrating your foot pod is optional and can improve accuracy. There are three ways to adjust the calibration: distance, GPS, and manual. Calibrating Your Foot Pod by Distance For best results, the foot pod should be calibrated using the inside lane of a regulation track. A regulation track (2 laps = 800 m) is more accurate than a treadmill. 1 Select MODE > Settings > Run Settings > Foot Pod > Calibrate > Distance 2 Select a distance. 3 Select Continue > START to begin recording. 4 Run or walk the distance. 5 Select STOP. Calibrating Your Foot Pod by GPS You must have GPS signals to calibrate the foot pod using GPS. 1 Select MODE > Settings > Run Settings > Foot Pod > Calibrate > GPS. 2 Select Continue > START to begin recording. 3 Run or walk approximately 1000 m. The Forerunner informs you that you have traveled far enough. Calibrating Your Foot Pod Manually If your foot pod distance seems slightly high or low each time you run, you can manually adjust the calibration factor. 1 Select MODE > Settings > Run Settings > Foot Pod > Calibration Factor. 2 Adjust the calibration factor. • Increase the calibration factor if your distance is too low. • Decrease the calibration factor if your distance is too high. ANT+ Sensors 25