Garmin GPS 48 Owner's Manual - Page 16

GETTING STARTED Highway Page & Cancelling a GOTO The GPS48 will also provide steering guidance with a Graphic Compass display. Once a GOTO is activated, the GPS 48 provides steering guidance until the GOTO is canceled. To cancel a GOTO, highlight the cancel prompt at the bottom of the page and press ENTER. 12 Highway Page Bearing to Waypoint Track Over Ground Destination Waypoint Graphic Highway Distance to Waypoint Speed Over Ground CDI Scale User Selectable Field The GPS 48's Highway Page provides graphic steering guidance to a destination waypoint, with emphasis on the straight-line desired course, the distance and direction you are off course. As you head toward your destination, the middle of the screen provides visual guidance to your waypoint on a moving graphic "highway." Your present position is represented by the diamond in the center of the CDI scale. The line down the middle of the highway represents your desired track. As you navigate toward a waypoint, the highway will actually move-indicating the direction you're off course-relative to the position diamond on the CDI scale. To stay on course, simply steer in toward the center of the highway. To select the Compass Page 1. From the Highway Page, press E twice. The Compass Page will now become the displayed navigation page. This page provides a directional pointer to your destination, by using a rotating compass display to show direction of travel. It provides better steering guidance at slower speeds with many directional changes. Cancelling a GOTO If you decide to stop navigating to the active waypoint, all you have to do is cancel the GOTO. To cancel an active GOTO: 1. Press the G key. 2. Use the arrow keypad to move the field highlight to the 'CANCEL GOTO' prompt at the bottom of the page and press E.