Garmin GPSMAP 525 Owner's Manual - Page 46
Configuring Communications Settings - 525s reviews
![]() |
UPC - 753759066116
View all Garmin GPSMAP 525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Configuring the Chartplotter • If the turns in the Auto Guidance line are too wide, from the Home screen, select Configure > Preferences > Navigation > Auto Guidance > Shoreline Distance > Nearest. 10.If you selected Nearest or Farthest in step 9, review the placement of the Auto Guidance line. Determine whether the line safely avoids known obstacles, and whether the turns enable efficient travel. 11. Repeat steps 1-10 at least once more, using a different destination each time, until you are familiar with the functionality of the Shoreline Distance setting. Configuring Communications Settings To change the communications settings from the Home screen, select Configure > Communications. Serial Port 1-configures the input/output format for serial port 1 to use when connecting your chartplotter to external NMEA devices, a computer, or other Garmin devices. Serial Port 2 (if supported)-configures the input/output format for serial port 2 to use when connecting your chartplotter to external NMEA devices, a computer, or other Garmin devices. • Garmin Data Transfer-supports the input or output of Garmin-proprietary data for communicating with Garmin software. • Garmin Remote Sonar Transfer (GPSMAP 40 420/450/520/550/525/555)-supports the input or output of Garmin-proprietary sonar data for communicating with Garmin software. • NMEA Standard-supports the input or output of standard NMEA 0183 data, DSC, and sonar NMEA input support for the DPT, MTW, and VHW sentences. • NMEA High Speed-supports the input or output of standard 0183 data for most AIS receivers. NMEA 0183 Setup-enable or disable NMEA 0183 output sentences for sounder, route, system, and Garmin NMEA settings. To enable or disable NMEA 0183 output sentences: 1. From the Home screen, select Configure > Communications > NMEA 0183 Setup. 2. Select a setting (Sounder, Route, System, or Garmin). 3. Select the NMEA 0183 output sentence to toggle the output on or off. • Posn. Precision-adjust the number of digits (Two Digits, Three Digits, or Four Digits) to the right of the decimal point for transmission of NMEA output. • Waypoint IDs-determine how the unit identifies waypoint identifiers (Names or Numbers). GPSMAP 400/500 Series Owner's Manual
![](/manual_guide/products/garmin-0100059700-owners-manual-d6f4693/46.png)