Garmin GPSMAP 525 Owner's Manual - Page 47

Setting Alarms, Setting Navigation Alarms - 525s manual

Get Garmin GPSMAP 525 - Marine GPS Receiver PDF manuals and user guides
UPC - 753759066116
View all Garmin GPSMAP 525 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

NMEA 2000 Devices-lists the NMEA 2000 devices on your network. If a NMEA 2000 device has configuration options or settings, select the device for a list of options. Note: Only the following units are NMEA 2000 compatible: GPSMAP 421/421s GPSMAP 451/451s GPSMAP 551/551s GPSMAP 521/521s GPSMAP 526/526s GPSMAP 556/556s CANet Devices-lists the CANet devices on your network. If a CANet device has configuration options or settings, select the device for a list of options. Note: Only the GPSMAP 420/450/520/550/525/555 (including "s" models) are CANet compatible: Setting Alarms You can set the unit to sound an audible alarm when certain conditions are met. By default, all alarms are turned off. To set an alarm: 1. From the Home screen, select Configure > Alarms. 2. Select an alarm category. 3. Select an alarm. GPSMAP 400/500 Series Owner's Manual Configuring the Chartplotter 4. Select On to turn on the alarm. 5. Specify alarm information. Setting Navigation Alarms To set a navigation alarm from the Home screen, select Configure > Alarms > Navigation. Arrival-set an alarm to sound when you are within a specified distance or time from a turn or destination waypoint. • Type-select whether you want arrival alarms to sound only when nearing destinations or when nearing either turns or destinations. Select Off to disable arrival alarms. • Activation-select whether the arrival alarm triggers on time to arrival or distance to arrival. • Change Time/Change Distance-if you have Activation set to Time, select Change Time to set the number of minutes before arrival that the alarm should sound. If you have Activation set to Distance, select Change Distance to set the distance before arrival that the alarm should sound. Use the Rocker to change the time or distance. Anchor Drag-set an alarm to sound when you exceed a specified drift distance. Off Course-set an alarm to sound when you are off course by a specified distance. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
GPSMAP 400/500 Series Owner’s Manual
4±
Configuring the Chartplotter
NMEA 2000 Devices
—lists the NMEA 2000 devices on your
network. If a NMEA 2000 device has configuration options or
settings, select the device for a list of options.
NOTE:
Only the following units are NMEA 2000 compatible:
GPSMAP 421/421s
GPSMAP 521/521s
GPSMAP 451/451s
GPSMAP 526/526s
GPSMAP 551/551s
GPSMAP 556/556s
CANet Devices
—lists the CANet devices on your network. If a
CANet device has configuration options or settings, select the device
for a list of options.
NOTE:
Only the GPSMAP 420/450/520/550/525/555 (including “s”
models) are CANet compatible:
Setting Alarms
You can set the unit to sound an audible alarm when certain
conditions are met. By default, all alarms are turned off.
To set an alarm:
1. From the Home screen, select
Configure
>
Alarms
.
2. Select an alarm category.
3. Select an alarm.
4. Select
On
to turn on the alarm.
5. Specify alarm information.
Setting Navigation Alarms
To set a navigation alarm from the Home screen, select
Configure
>
Alarms
>
Navigation
.
Arrival
—set an alarm to sound when you are within a specified
distance or time from a turn or destination waypoint.
Type
—select whether you want arrival alarms to sound only
when nearing destinations or when nearing either turns or
destinations. Select
Off
to disable arrival alarms.
Activation
—select whether the arrival alarm triggers on time to
arrival or distance to arrival.
Change Time/Change Distance
—if you have Activation set to
Time, select
Change Time
to set the number of minutes before
arrival that the alarm should sound. If you have Activation set
to Distance, select
Change Distance
to set the distance before
arrival that the alarm should sound. Use the
Rocker
to change
the time or distance.
Anchor Drag
—set an alarm to sound when you exceed a specified
drift distance.
Off Course
—set an alarm to sound when you are off course by a
specified distance.
•
•
•