Garmin GPSMAP 60CS Owner's Manual - Page 61
To Preview the Turns for an Active Route
UPC - 753759044060
View all Garmin GPSMAP 60CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
GPSmap 60CS GPS Navigation Navigating a Route After you have created a route, you can begin navigation immediately or save it to the Saved Routes list as explained on page 49. Using Routes When you are navigating a route, a guidance message and graphic view of turns in the route displays as you approach each one. Using the "Follow Roads" option from the Routing Setup Page increases the number of turns and displays an Active Route page with a list of turns. If you selected the "Off Road" option you can view only the list of points for a route from the Active Route Page. (See Routing Setup on page 62.) When on a route, the Active Route Page is part of the Main Page sequence. To Preview the Turns for an Active Route: This field changes to red at the second warning beep, when you are about to reach the turning point. 1. From the Routes Page, highlight the route from the Routes list and press ENTER to display the Route Page for the route. Preview of Turn 4 of 9 Turns on a Route 2. Highlight the "Navigate" button and press ENTER to begin navigation and display the route on the Map Page. 3. To view the list of turns on the route, press the PAGE key to display the Active Route Page. To view any individual turn on the list, use the ROCKER key to highlight it and press ENTER. 4. The page displays the turn and guidance text and a small field at the bottom showing the turn number in sequence and total turns in the route. To scroll through all turn previews, use the ROCKER key Up and Down arrows. To exit the preview page, press the QUIT key. 5. To stop navigating, select "Stop Navigation" from the Map or Compass Page and press ENTER. List of Turns for an Active Route using the "Follow Roads" option 51