Garmin GPSMAP 60CS Owner's Manual - Page 97
Connecting the GPSmap 60CS, to a Computer - map install
UPC - 753759044060
View all Garmin GPSMAP 60CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Interfacing the GPSmap 60CS The GPSmap 60CS is provided with interface connection to a PC using either a serial port or USB connector cable. Connection to your computer is necessary for downloading of detailed map from Garmin MapSource Map Data CDs. You can also save routes, waypoints, and tracks from the GPSmap 60CS to MapSource. Refer to the MapSource User's Guide provided with your MapSource CDs. To connect to your computer using the USB connector: 1. Install the MapSource Trip and Waypoint Manager CD-ROM provided with your GPSmap 60CS on your PC. USB drivers, required for USB interfacing, are installed when you run the CD-ROM. Do not connect the USB cable until the drivers have been installed. 2. Lift the USB protective cover from the back of the GPSmap 60CS and insert the smaller connector on the USB cable into the matching port. 3. Connect the remaining cable end to your PC USB port. To connect to your computer using a Serial Port connector: 1. Lift the Serial Port protective cover from the back of the GPSmap 60CS and insert the round indexed connector on the cable into the matching port. 2. Connect the remaining cable end to your PC Serial port or other appropriate device. 3. Set your GPSmap 60CS interface setting to the appropriate interface format. Refer to Interface Setup on page 56. GPSmap 60CS Appendix Connecting the GPSmap 60CS to a Computer Universal Serial Bus (USB) Port Serial Communications Port Lift Cover Lift Cover 87