Garmin GTN 650 Pilot's Guide - Page 261

14.2 Flight Timers Foreword The Flight Timers function provides count up/down timers, plus automatic recording of departure time, and total trip time. Departure and total trip time Getting Started recording can be configured to run either any time unit power is on, or only when your ground speed exceeds the in-air threshold set by the installer (for example, Xpdr Ctrl 30 knots). A flexible Generic Timer is available for general timing needs. Com/Nav NOTE: When a count up timer is used, the preset value has no function. FPL 1. While viewing the Utilities page, touch the Flight Timers key. Direct-To 2. If the Generic Timer Direction counter is set to "Up," the Reset Timer key will be shown and when touched will return the timer to 00:00:00. If the Direction counter is set to "Down," the Preset Timer key will be shown and the key will return the timer to the Preset time value. Start/Stop Generic Timer Selected Counter Direction Select Preset Time Reset or Preset Timer Elapsed Time Touch To Toggle Timers Figure 14-11 Utility Flight Timers Page (Generic Timer) Proc Wpt Info Map Traffic Terrain Weather Nearest 3. Touch the Trip/DEP Timers or Generic Timer keys to toggle Music between the timer types. Reset Timer Select Criteria For Timer Start Elapsed Time Departure Time (Local Time) Touch To Toggle Timers Utilities System Messages Set Departure Time To Current Local Time Of Timer Start Figure 14-12 Utility Flight Timers Page (Trip/DEP Timers) Symbols Appendix 4. Touch each key as desired to set up timer operation. Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 14-9