Garmin Geko 301 Owner's Manual - Page 15
Satellite
UPC - 753759042073
View all Garmin Geko 301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Normal Skyview Advanced Skyview Status Message Location Accuracy (estimated) Satellites Satellite Signal Strength Bars (a 'D' stands for differential corrections and denotes a WAAS Satellite) The '3D' displays when receiving signals from four or more satellites. The Satellite Page displays the Geko 301 looking for and gathering all the necessary information from satellites in order to give your location. There are two display options on the Satellite Page, Normal Skyview and Advanced Skyview. Normal Skyview shows you (in animation), the satellites, receiving satellite signals, the signal strength, and the Geko 301's estimated location accuracy. To activate the Advanced Skyview page, press the OK Button on the Satellite Page, select 'Advanced Skyview' option and press the OK Button again. This page displays the actual numbered satellites in orbit the Geko 301 is using, their proximity to your current position, and their individual strengths. The outer circle of the display represents the horizon and the center represents the sky directly overhead to help you determine the location of the satellites. When you see the "READY TO NAVIGATE" message, the Geko 301 has found your location and you are ready to go! Satellite Page What is the Satellite Page? A "READY TO NAVIGATE" message must display before you can begin using your Geko 301 to navigate. ) NOTE: When you use the Geko 301 for the first time, allow time for it to track satellites by leaving the Geko 301 outside with a clear view of the sky for 15-30 minutes. 3