Garmin Sport PRO Owner s Manual - Page 9

Registering Your Device, Getting More Information, Getting the Owner's Manual - outdoor

Get Garmin Sport PRO PDF manuals and user guides View all Garmin Sport PRO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

7 Verify the gasket is not damaged and is completely seated in the groove on the front half of the device. 8 Verify the USB gasket is not damaged and is completely positioned around the USB opening on the back half of the device. 9 While ensuring the battery wires are not pinched, hold the back plate and the device firmly together, and replace all security screws without tightening them. 10Verify the back plate and the device are aligned with no gaps. 11Tighten the screws evenly. 12Verify the gasket is not sticking out of the device. Sport PRO Dog Collar Device Components Security screws À Top plate Á Battery plate screws  Battery plate à Battery Ä Gasket Å Front enclosure Æ Replacing the Dog Collar Device Battery Before you can replace the battery, you must remove all dirt, water, and debris from the device. You also need a small Phillips screwdriver and the security screwdriver included in the battery replacement kit. 1 Remove the six screws from the top plate, and remove the top plate. 2 Remove the two screws from the battery plate, and remove the battery plate. 3 Grip the battery connector wires close to the connector, and pull the connector parallel to the circuit board to disconnect the battery connector from the device. 4 Remove the battery. The battery fits tightly. It may be necessary to pry the battery out of the back plate using a non-sharp, non-metal object. 5 Install the new battery into the front enclosure with the label side of the battery facing up, and the leading edge of the battery placed under the charging contact ledge of the device. 6 Replace the battery plate, and replace and tighten the two screws. Device Information 7 Verify the gasket is not damaged and is completely seated in the groove. 8 With the new battery, connect the battery connector to the device. When properly installed, the connector plug snaps into the port. 9 Replace the front plate, and replace and tighten the six screws to secure the front plate. 10Verify the gasket is not sticking out of the device. Registering Your Device Help us better support you by completing our online registration today. • Go to http://my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. Getting More Information You can find more information about this product on the Garmin® website. • Go to www.garmin.com/outdoor. • Go to http://buy.garmin.com, or contact your Garmin dealer for information about optional accessories and replacement parts. Getting the Owner's Manual You can get the most recent owner's manual from the web. 1 Go to www.garmin.com/manuals/sportpro. 2 View or download the full owner's manual in your preferred format. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
7
Verify the gasket is not damaged and is completely seated in
the groove on the front half of the device.
8
Verify the USB gasket is not damaged and is completely
positioned around the USB opening on the back half of the
device.
9
While ensuring the battery wires are not pinched, hold the
back plate and the device firmly together, and replace all
security screws without tightening them.
10
Verify the back plate and the device are aligned with no gaps.
11
Tighten the screws evenly.
12
Verify the gasket is not sticking out of the device.
Sport PRO Dog Collar Device Components
À
Security screws
Á
Top plate
Â
Battery plate screws
Ã
Battery plate
Ä
Battery
Å
Gasket
Æ
Front enclosure
Replacing the Dog Collar Device Battery
Before you can replace the battery, you must remove all dirt,
water, and debris from the device. You also need a small
Phillips screwdriver and the security screwdriver included in the
battery replacement kit.
1
Remove the six screws from the top plate, and remove the
top plate.
2
Remove the two screws from the battery plate, and remove
the battery plate.
3
Grip the battery connector wires close to the connector, and
pull the connector parallel to the circuit board to disconnect
the battery connector from the device.
4
Remove the battery.
The battery fits tightly. It may be necessary to pry the battery
out of the back plate using a non-sharp, non-metal object.
5
Install the new battery into the front enclosure with the label
side of the battery facing up, and the leading edge of the
battery placed under the charging contact ledge of the
device.
6
Replace the battery plate, and replace and tighten the two
screws.
7
Verify the gasket is not damaged and is completely seated in
the groove.
8
With the new battery, connect the battery connector to the
device.
When properly installed, the connector plug snaps into the
port.
9
Replace the front plate, and replace and tighten the six
screws to secure the front plate.
10
Verify the gasket is not sticking out of the device.
Registering Your Device
Help us better support you by completing our online registration
today.
•
Go to
.
•
Keep the original sales receipt, or a photocopy, in a safe
place.
Getting More Information
You can find more information about this product on the Garmin
®
website.
•
Go to
www.garmin.com/outdoor
.
•
Go to
, or contact your Garmin dealer
for information about optional accessories and replacement
parts.
Getting the Owner's Manual
You can get the most recent owner's manual from the web.
1
Go to
www.garmin.com/manuals/sportpro
.
2
View or download the full owner's manual in your preferred
format.
Device Information
5