Garmin aera 660 aera 660 Pilot s Guide - Page 19

Overview Navigation Flight Planning Hazard Avoidance Additional Features Overview CHARGING THE BATTERY NOTE: While in Charge Mode, the unit draws a current from the aircraft. To avoid discharging the aircraft's battery, disconnect the external power cable from the unit when not in use for several days. Charge the aera for at least 4 hours before using on battery power. Charge the battery by connecting the aviation power cable, the USB cable, an AC adapter, or use a stand-alone battery charger (optional accessory). Plug the unit into a 12-Volt or 24-Volt connector to charge. The unit can be used while it is charging. Charge the unit within the following temperature range: 41° to 95°F (5° to 35°C). 1) Mount the aera 660 in the aircraft and connect the power cable to the aircraft power outlet (cigarette lighter receptacle). 2) Route the power cable so that it does not interfere with aircraft operation. The unit begins charging as soon as external power is applied. USING CHARGE MODE Applying external power to the aera automatically turns on the unit for full operation. If the battery is present and needs to be charged, the external power source charges the battery while the unit is in use. If you do not want to use the unit, but you would like to charge the battery, you can put the unit into Charge Mode. Connect the unit to an external power supply. Press and hold the POWER Button. Instead of completely turning off, the unit now goes into Charge Mode. The unit will run cooler and may allow more current to be available for charging the battery while in Charge Mode. MOUNTING THE aera IN THE AIRCRAFT Refer to Appendix D 'Installation & Interfacing' for information on mounting the aera in the aircraft. Appendices Index 190-02017-20 Rev. A Garmin aera 660 Pilot's Guide 3