Garmin zumo 665LM Owner's Manual - Page 10
Step 5: Installing Your zūmo in, the Mount, Removing Your zūmo from, Connecting the GXM 40 Antenna
View all Garmin zumo 665LM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting Started Cradle Base plate Double-socket arm Power cable Knob Handlebar base Step 5: Installing Your zūmo in the Mount 1. Fit the bottom of your zūmo into the cradle. 2. Tilt the zūmo back until it snaps into place. Cradle Release button Power cable Removing Your zūmo from Either Mount 1. Press the button on the side of the mount to release the zūmo. 2. Lift out the zūmo. 3. Place the weather cap on the cradle (motorcycle mount only). Connecting the GXM 40 Antenna to the Motorcycle Mount Notice Do not place the GXM 40 antenna on the fuel tank or in any location where it may come into contact with fuel or excessive heat. 1. With the zūmo placed in the motorcycle mount, remove the weather cap from the mini-USB connector on the Power cable. 2. Plug the GXM 40 antenna into the miniUSB connector. 3. Place the GXM 40 antenna within clear view of the sky in an area where there is at least 10 cm between the antenna and your zūmo. For best performance, place the GXM 40 antenna at least 30 cm away from the zūmo. Note: The GXM 40 antenna can also be placed in an area covered by a nonconductive material; such as a fiberglass top-case, tank bag, or leather saddlebag. zūmo 665 Owner's Manual